mikeonis Posted September 8, 2013 Share Posted September 8, 2013 New to the forum and to Line 6. I purchased a used Pod pro and a used mk2 floorboard, the floorboard won't connect to the pod. According to the person who sold me the floorboard, it worked fine using the CAT5 cable with his desktop software. I have googled for solutions and have found nothing. Except one person who complained on harmonycentral that the two are not compatible, even though it says they are on the line 6 site. I would not have purchased the pod pro had I known there would be this problem. I read somewhere about a firmware upgrade for the pod pro, how do I do that when there is no USB port on the Pod pro... My question is: are these two units compatible? If so, how do I achieve making them work together? Please help as I am out of options here and I need something for an out-of-country show later this month. Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted September 8, 2013 Share Posted September 8, 2013 the original pod pro uses the "floorboard" and not an FBV or FBV MKII. the fbv mk2, will work fine with "desktop software".... the board you need is no longer made, but you can find it here: http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1311.R1.TR3.TRC1.A0.Xline6+floo&_nkw=line6+floorboard&_sacat=0&_from=R40 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.