rychester63 Posted March 7, 2017 Share Posted March 7, 2017 While playing the audio drops out, but if you crank the wheel (volume ) you can barely hear it. It doesn't seem to matter which patch. Tried different guitars also. If you go to the next patch volume is there, go back to original patch and its ok til the next time it happens. Any ideas? Quote Link to comment Share on other sites More sharing options...
DunedinDragon Posted March 8, 2017 Share Posted March 8, 2017 Sure. TONS of ideas. But without a little more information about what you're connected to as an output device and how you have things set up they're all pretty irrelevant. Quote Link to comment Share on other sites More sharing options...
MonkeyXT Posted March 8, 2017 Share Posted March 8, 2017 Sounds like the EXP1 position parameter issue - is your expression pedal tied to a volume block in your signal paths? Quote Link to comment Share on other sites More sharing options...
datacommando Posted March 8, 2017 Share Posted March 8, 2017 Sounds like the EXP1 position parameter issue - is your expression pedal tied to a volume block in your signal paths? THIS Recommend that you check this first. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted March 8, 2017 Share Posted March 8, 2017 While playing the audio drops out, but if you crank the wheel (volume ) you can barely hear it. It doesn't seem to matter which patch. Tried different guitars also. If you go to the next patch volume is there, go back to original patch and its ok til the next time it happens. Any ideas? What they said above ^. If you are running a volume block in your preset, set it to EXP2 and not EXP1. EXP2 is default for the volume pedal. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted March 8, 2017 Share Posted March 8, 2017 Check the manual for doing pedal calibrations. Quote Link to comment Share on other sites More sharing options...
rychester63 Posted March 8, 2017 Author Share Posted March 8, 2017 Since I'm a newbie at this can someone explain how to switch control from expression 1 to 2. Thank You. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted March 8, 2017 Share Posted March 8, 2017 Since I'm a newbie at this can someone explain how to switch control from expression 1 to 2. Thank You. move the cursor over to the volume block. Hold down the "Position" button below the screen. The menu will appear that will allow you to choose which expression pedal. If you choose EXP1, you may get the pedal position going to 1% randomly. EXP2 is default. Quote Link to comment Share on other sites More sharing options...
MusicLaw Posted March 8, 2017 Share Posted March 8, 2017 If I recall correctly, this is suposed to be corrected in the forthcoming firmware 2.20 later this month. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.