iamjethro Posted March 29, 2017 Share Posted March 29, 2017 I recently purchased my first Line 6 product. Is there a way to access the 300 or so presets without a foot board? Thanks Quote Link to comment Share on other sites More sharing options...
BillBee Posted March 29, 2017 Share Posted March 29, 2017 The manual will be your best buddy to help you learn all the features the Spider Series has to offer. I would imagine that if it has 300 presets there is a way to get there from the front end of the amp. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted March 30, 2017 Share Posted March 30, 2017 Which Line 6 amp do you have? Quote Link to comment Share on other sites More sharing options...
iamjethro Posted April 1, 2017 Author Share Posted April 1, 2017 I have the spider IV 75. I found the other presets by messing with knobs.. Thanks. I have another thread started with questions about foot controllers. Quote Link to comment Share on other sites More sharing options...
JoshuaS Posted July 25, 2017 Share Posted July 25, 2017 Quick question. I have a Spider IV 75 watt. I can play for maybe 15 to 30 seconds then the LCD screen displays the manual knob settings: dr bs md tr vo r. This is when I lose sound. I can turn to another preset and sound comes back for about another 30 seconds. Any ideas? Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted July 25, 2017 Share Posted July 25, 2017 This could be 'loose knob' issue. Back all the controls except the master volume to 0, then select your preset. See if the problem still happens. If the problem goes away, then you need to figure out which knob(s) are causing the problem, with one at a time, turn them half way, select a preset and see if anything happens. Once you find out which knob is the issue, you can place a small rubber o-ring on the shaft behind the knob which will make the knob harder to turn. If the problem still happens, then try a factory reset next - if you have any saved patches, back them up to your computer first (you need an FBV Mk II foot pedal for that). Hold the 'A' button in while turning on the power, keep it held in for about 5 seconds. This will change all the patches back to the factory settings. If the problem still happens, the amp will need to go to a factory service center for evaluation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.