gibsonlespaul2 Posted April 5, 2017 Share Posted April 5, 2017 What's going on here and how do I fix it? I can't exactly record like this. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted April 5, 2017 Share Posted April 5, 2017 Hard to say without seeing at least a picture of your preset screen. Quote Link to comment Share on other sites More sharing options...
gibsonlespaul2 Posted April 5, 2017 Author Share Posted April 5, 2017 http://imgur.com/gallery/KcUvb Like so? Quote Link to comment Share on other sites More sharing options...
BINGEWOOD Posted April 5, 2017 Share Posted April 5, 2017 If you are routing the first path to the second then you want to turn off the input on the second path. It looks like guitar is selected there as well as it getting the signal routed from the first path. Quote Link to comment Share on other sites More sharing options...
FlyingsCool Posted April 5, 2017 Share Posted April 5, 2017 What was your expected routing? It looks like your getting exactly what you say you are getting... Guitar into dirt and amp -> | >-------------------->------> routed to delay/reverb -> Out Guitar -> | Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted April 5, 2017 Share Posted April 5, 2017 That's just one serial path, not a wet/dry setup. I guess I am not understanding. Quote Link to comment Share on other sites More sharing options...
Verne-Bunsen Posted April 5, 2017 Share Posted April 5, 2017 The output of Path 1 is routed to the input of Path 2, but it looks like the input of Path 2 is also set to receive the raw guitar. That will produce exactly what you describe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.