Giax1974 Posted April 27, 2017 Share Posted April 27, 2017 Hi, After several hours testing the amp switching, I have found this issue with my Mesa Electra Dyne. When I assign my amp channels in snapshot mode to a new preset, lets say: footswitch 1(green ch), fooswitch 2 (blue 2) and footswitch 3 (red ch) in command center, and press SAVE. It works. SWITCH 3 CHANNELS When I add a effects loops block to my preset, and press SAVE. It continue working. SWITCH 3 CHANNELS When I add any effect block, and press SAVE. The green channel is gone, and replaced with the red channel, so STOPS WORKING 3 CHANNELS. So TIP and RING are not working any more when adding block. Looks like the TRS 3 options: Tip, Ring, Tip+Ring cannot be handled when used with effects blocks... I only works with the Effects loop block... Any ideas on this...I haven't tried it with old firmwares, I just got this device and installed the new updgrade... Hope you can fix this... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.