Mooseboy08 Posted April 28, 2017 Share Posted April 28, 2017 Hey, all— I've spent about two hours with my new Helix, so this is no doubt an easy question. My old MFX pedal is a Boss GT-10, and I've set up the expression pedal to always be volume, and always be at 50% when rolled all the way back, and 100% when rolled all the way forward. That way all the way back is rhythm level, and all the way forward is solo level. It works very well for me, and I'm quite used to it. So is it possible to do this same thing with the Helix? Running newest firmware (2.21) TIA, Mooseboy Quote Link to comment Share on other sites More sharing options...
ADBrown Posted April 28, 2017 Share Posted April 28, 2017 Select your volume pedal block, push in and hold down the knob the that corresponds to the position parameter, set Min Value: 50%, and Max: 100% Quote Link to comment Share on other sites More sharing options...
ZSchneidi Posted April 28, 2017 Share Posted April 28, 2017 Yep that should do the trick. Different from the Boss GT series you have to remember that the expression pedal needs a dedicated effects block in that case the volume block to work with. Bind the exp. pedal to that block and to what ADBrown told you ^^ done. Quote Link to comment Share on other sites More sharing options...
Mooseboy08 Posted April 28, 2017 Author Share Posted April 28, 2017 Excellent! Thanks very much, works like a charm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.