wiiNinjaOne Posted May 20, 2017 Share Posted May 20, 2017 I've just purchased a Relay G10 (G10R according to the tag at the bottom of the receiver). I downloaded the Line6 Updater v1.11 and installed in my computer. I plugged the G10 into my Windows 10 PC and the computer was able to detect and installed the driver (according to the PC's Device Manager). I ran the Line6 Updater, but there's a blank screen after the sentence "Select A device to update". Does this mean I don't need to update? Or that the updater doesn't see my connected G10? How do find out the current firmware version of the G10? I also tried to find some instructions on the updater, but none found. I'd appreciate any info. Thanks. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted June 1, 2017 Share Posted June 1, 2017 It's not seeing it. Try a different USB port on your PC. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted June 1, 2017 Share Posted June 1, 2017 Also make sure that the transmitter is fully seated into the receiver, engaging the micro switch. Quote Link to comment Share on other sites More sharing options...
canoecaper Posted November 29, 2018 Share Posted November 29, 2018 Greets, Attempting to ensure my new Relay G10 is up to date. 30/11/18. Have update package OK. No trace of any device drivers anywhere, just MS playing with itself. Nothing new there! Rgds. canoecaper UK Quote Link to comment Share on other sites More sharing options...
smitty1964 Posted January 11, 2019 Share Posted January 11, 2019 I got my g10 today base has been charging for hrs still flashing red. The transmitter has no light and it is in the base correctly. when taken out of base still no light on transmitter. Quote Link to comment Share on other sites More sharing options...
amp2 Posted January 12, 2019 Share Posted January 12, 2019 smitty1964, I have the same prob. Then again, the Emoji's are out here too... Quote Link to comment Share on other sites More sharing options...
vargalas Posted April 14, 2019 Share Posted April 14, 2019 Transmiter's led is flashing continuosly. Receiwer FW 1.0, transmitter's FW 1.04 Annoying. Quote Link to comment Share on other sites More sharing options...
bassistapisano Posted February 25, 2020 Share Posted February 25, 2020 also mine have the same problem Quote Link to comment Share on other sites More sharing options...
Jake713 Posted March 22, 2020 Share Posted March 22, 2020 updated my g10 today and now it doesnt work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.