Slight POD Farm 2.5 issue

[Wizzite]

Hey,

 

Recently a friend recommended POD Farm to me for microphone recording (his mic sounds incredible). So I downloaded it. Right now, I don't have a license and am running in trial mode and using with the Scarlett 2i2 interface.

 

My issue is, I can't seem to get the mic to output any effects/settings which my friend has told me to put into POD Farm.

 

I was just wondering if POD Farm can do this with a non Line 6 interface, in trial mode? I've searched around the web to find more information but none of it is perfectly clear.

 

All I wanna do is use the 2i2 interface with POD Farm and record mic in audacity.

 

Thanks guys!

 

 

[silverhead]

In Pod Farm go to the Mixer page and make sure you have selected the Mic as input.

[Wizzite]

In Pod Farm go to the Mixer page and make sure you have selected the Mic as input.

Might sound super stupid, but how do I select my input? (I'm using trial version, could this be the reason why?)

[Wizzite]

In Pod Farm go to the Mixer page and make sure you have selected the Mic as input.

I've gone ahead and bought the standard license for the stand alone version of POD Farm 2.5. Still can't select the mic as an input...

[silverhead]

See sections 3 or 4 depending on whether you are using Pod Farm as a plugin or standalone.....

 

http://line6.com/data/6/0a060b316ac34f0593ccf3e0a/application/pdf/POD%20Farm%202%20Recording%20Setup%20Guide%20%20-%20English%20(%20Rev%20A%20).pdf

 

There are also other Pod Farm manuals. See the Support tab at the top of this page, then Technical Support, then Manuals.