Jump to content
raiko12345

POD Pro not powering up correctly

Recommended Posts

Hi

 

I bought a Pod Pro and i opened it up and there was 1,2v chip in it. I also have POD 2.0 with 2.3v chip inside, so it thought i will try to switch chips, and it didnt work, only two lights on the left and on the right where are theres holes like vents lighted up. And now when i put my originaal 1.2v chip back into POD Pro, same thing happes, only lights and the pod wont power up and the chip heats up really good. I there a chance that when 2.3v chip is applied, the pods brain goes grazy or something? no i need to reset te battery inside, or firmware?

 

Thanks

Raiko

Share this post


Link to post
Share on other sites

Yes it was working. If ill try to reinstal firmware with midi to usb cable will it work?

 

No, the POD Pro can handle patch edits via MIDI SysEx, but firmware has to be a physical EPROM swap (meaning it is on a hardware chip that the POD Pro itself cannot program).

 

The firmware between the two units isn't compatible at all.

Share this post


Link to post
Share on other sites

 I got mine working by taking the chip out and turning it on for few seconds and then ja placed chip back and it worked. This can be helpful for some others with freeze problems i saw.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×