Jump to content
FarleyUK

Use Your Illusion / Spaghetti Incident Impulse Response

Recommended Posts

Hi guys,

 

I've been playing around with trying to create an IR based on the recorded guitar tone Slash has on the UYI and Spaghetti Incident albums. Brand new to this, but think I've got it fairly close...

 

I used Voxengo, Reaper and Ozone 7 to EQ match with the guitar track - feel free to give the IR a spin from here:

 

 https://dl.dropboxusercontent.com/u/46739309/UYI.wav

 

As I said, it's my first attempt, so please be gentle....!

Share this post


Link to post
Share on other sites

Since ir's can be very customized, we need to know the other effects in the chain. Amp, overdrive, etc.

 

Does this replace the speaker cab or use along with a cab. Check out some of Glenn DeLaune's presets. He uses his own custom ir's along with cabs.

Share this post


Link to post
Share on other sites

Since ir's can be very customized, we need to know the other effects in the chain. Amp, overdrive, etc.

 

Does this replace the speaker cab or use along with a cab. Check out some of Glenn DeLaune's presets. He uses his own custom ir's along with cabs.

 

Cheers - yeah, I thought about Glenn's patches earlier, funnily enough.

 

When I've been trying this IR I captured, I use the 2204 amp with an OD pedal in front - normally a Minotaur - with the gain at 1, tone around 5.5 and Level around 6-7. The amp has gain at 6.5, Bass at between 5 and 7, Mids at around 6-7, Treble around 4.5, Presence at 7-8, Master at 6, Sag at 6.5, hum and ripple at 0, bias around 7.

 

I was just using it as an IR direct after the amp block.

Share this post


Link to post
Share on other sites

Cheers - yeah, I thought about Glenn's patches earlier, funnily enough.

 

When I've been trying this IR I captured, I use the 2204 amp with an OD pedal in front - normally a Minotaur - with the gain at 1, tone around 5.5 and Level around 6-7. The amp has gain at 6.5, Bass at between 5 and 7, Mids at around 6-7, Treble around 4.5, Presence at 7-8, Master at 6, Sag at 6.5, hum and ripple at 0, bias around 7.

 

I was just using it as an IR direct after the amp block.

Excellect reply! I'll have to check it out when I have time.

Share this post


Link to post
Share on other sites

Anyone else tried this yet..? To me, it sounds a lot more 'alive' than a lot of the IRs I've purchased; they seem to sound like the speaker has a blanket over it compared to this one I created.

Share this post


Link to post
Share on other sites

I will definitely try YUI IR when i have some more time i am a huge GNR fan  :)

Share this post


Link to post
Share on other sites

Why dont you just post the preset? Then people can get most of the way to the tone you are trying to achieve. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...