gary9605 Posted September 22, 2013 Share Posted September 22, 2013 Would be possible to hookup a spiderjam amp via its RCA jacks, into my UX2 interface? My concern is with power issues. Quote Link to comment Share on other sites More sharing options...
Triryche Posted September 23, 2013 Share Posted September 23, 2013 Yep. Just use RCA to 1/4 cables or adapters . fyi...If you plug in headphones the master volume will control the output of the RCA outs. Quote Link to comment Share on other sites More sharing options...
gary9605 Posted September 25, 2013 Author Share Posted September 25, 2013 I tried it........... didn't seem to work. Set up Spiderjam to output routing to: All Normal to RCA and Phones used a Y adapter from the RCA on the Spiderjam into ( tried both ) the Insturment jack on front of the UX2, and also into one of the Line inputs on backside of UX2 Opened POD farm...... Opened up my DAW in both configurations.......... i could barely hear any sound.... and got a lot of distrotion. Quote Link to comment Share on other sites More sharing options...
Triryche Posted September 26, 2013 Share Posted September 26, 2013 You should not use a Y adapter. Use 2 cables that like this: http://www.zzounds.com/item--HOSCPR20 Or 2 adapters like this http://www.sweetwater.com/store/detail/GPR101?utm_source=Google&utm_medium=PPC&utm_campaign=none&device=c&network=g&matchtype=&gclid=CNH24b7g57kCFUVp7Aodxk0AyA with 2 RCA cables. Then in POD Farm Select Line1 for Tone A and Line2 for Tone B and in the POD Farm mixer pan them hard L/R. Make sure you select Line6 UX2 ASIO as your device in the DAW. Quote Link to comment Share on other sites More sharing options...
gary9605 Posted September 26, 2013 Author Share Posted September 26, 2013 You should not use a Y adapter. Use 2 cables that like this: http://www.zzounds.com/item--HOSCPR20 Or 2 adapters like this http://www.sweetwater.com/store/detail/GPR101?utm_source=Google&utm_medium=PPC&utm_campaign=none&device=c&network=g&matchtype=&gclid=CNH24b7g57kCFUVp7Aodxk0AyA with 2 RCA cables. Then in POD Farm Select Line1 for Tone A and Line2 for Tone B and in the POD Farm mixer pan them hard L/R. Make sure you select Line6 UX2 ASIO as your device in the DAW. Ok I'll give that a try. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.