mikebruno Posted July 30, 2017 Share Posted July 30, 2017 Any thoughts on this monitoring setup? I think Kemper amp version works this way if you go directly with IR cab to FOH , and that is what I do with my helix , but for your stage power they go with a real gtr cab to push some air. I guess the idea is to have a cab that is matching the IR that is sent to FOH ? If not , you won't remember what tour tone sounds like to FOH. As an ex: I send XLR direct an IR of the 1960 A , I should have one on stage to get the exact tone I'm sending out to the board.. Right? Is anyone have experienced this setup ? Notice that I always have stage wedges or IEM as monitoring depending on witch act I play with. Cheer thank Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted July 31, 2017 Share Posted July 31, 2017 You can do that if that is what you prefer. I don't find it necessary to do that, I just monitor what is going to FOH through my IEM or wedge with the full mix to my taste. Quote Link to comment Share on other sites More sharing options...
DunedinDragon Posted July 31, 2017 Share Posted July 31, 2017 If you're using an actual guitar cabinet on stage it will never be consistent with the sound of an IR that goes to the FOH because the IR's sound is the result of not just the cabinet, but the mic or mics being used as well as the mic placement on the cabinet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.