Jump to content
Sign in to follow this  
HerbertOehlers

My Variax 700 Is Not Producing Any Sound When I Connet It Thru The1/4"plug, I Checked The Batteries They Are Ok With 9.5 Volts...

Recommended Posts

My Variax 700 is not producing any sound when I connect it thru the1/4"plug, I checked the batteries they are ok with 9.5 volts...If I use my variax 700 hru VDI it works. What else could be the problem?

Share this post


Link to post
Share on other sites

Try the 1/4 inch plug while powered through the VDI.  If that works then it's probably your battery connection between the battery and the main board.  Should not be too hard to fix.  The main board is healthy if your 700 plays through the VDI.

Share this post


Link to post
Share on other sites

I powered the Variax 700 thru the VDI and plug into the amp via the 1/4" jacks and it works...Thanks for the tip. 

I could be that the doide is broken, because I measured the power and notices that only after the diode the power is gone...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...