Jump to content
Sign in to follow this  
rpschultz13

Helix routing, inputs, outputs, stereo, etc.

Recommended Posts

Just got my Helix. I can create a split and merge from 1 input. But it doesn't seem possible to take 2 actual inputs and merge them, or split 1 input to 2 separate actual outputs. There's that dashed line between the two on the screen.

 

1) First, very simple, can't I get the same signal out of both L and R 1/4" jacks?

 

2) Can I input 2 pickups from my acoustic guitar, merge them using a PAN function and then output to 1 output.

 

HELP!

 

Thanks.

Ryan

Share this post


Link to post
Share on other sites

Yep, you can do both.

First you have to select the circular handle that represents the signal split or merge and drag it down as if it was a regular block, and you’ll create a second separate input or output. Then just choose the routing you need

Share this post


Link to post
Share on other sites

Also keep in mind that the paths you are looking at on the screen (1a, 1b, 2a, 2b) are each stereo paths. 

Share this post


Link to post
Share on other sites

Sure! You can do this in a variety of ways. Helix is very flexible.

 

By default, Helix's Input Block signals and FX Returns are routed to both formats (1/4" and XLR) of Helix's Main Outs. You may change this routing via your Signal Path Block Parameter configurations via Pan parameters, via Global Settings, and Output Block configurations.

 

If you are connecting a mono signal source to Helix, it will be present at both the L and R 1/4" Main Output Jacks. It will also be present at the FX Send 1/4" Outs if you define an FX Send Block in your Signal Path.

 

Regarding two Pickups from your Acoustic Guitar, you could use Helix's Main Guitar In and Aux In, or Main Guitar In and an FX Return. The latter woudl be he way you would have to go if you have a Helix LT. Depending on the design of your Acoustic's pickups, you may would need to adjust the signal levels accordingly due to the output of the Acoustic's pickups. If you have full Helix (Floor or Rack) you could also explore the Helix's Mic XLR In (depending on the output type of your Acoutic's pickups/eletronics pkgs).

 

Once connected to the Helix you would define another signal path. Either Path 1B or 2A, unless you chose to use the FX Return and defined an FX Block on your Path 1A Signal Path.

 

As Helix offers many signal path routing, Serial, Super Serial, Parallel, etc. there are several ways to configure what will work best for your acoustic and any other desired Blocks in your Signal Path (Compressors, Studio Tube PreAmp, Chorus, Reverb, Delay, etc.)

 

Also bear in mind that Helix's two DSP chips are dedicated one each to Path 1A/1B and Path 2A/2B. Thus, if your Path 1A/1B becomes too conjested with Blocks such that it consumes DSP resources of the first chip, route your signal path to Path 2A/2B.

 

The Signal Path routing is done, first, using the Joystick to select an existing block in Path 1A, then using the Action Button, then dragging the selected Block down to create Path 1B. Once you have done this, you may then select the Spiit and Merge points (also known as Blocks), as well as the Output Block of Path 1A or Path 1B to access other Menu choices by pressing the Joystick button. The actual process is quicker than reading the description! ;)

 

Hope this helps, and I'm sure that others will also provide more insights.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...