Fheder Posted December 15, 2017 Share Posted December 15, 2017 Hello Colleagues I have already created an WAH Pedal Automatization in Pro Tools 12.4 and using it with Bias Fx with no problems, Now I am trying to use the same MIDI information in HELIX NATIVE without Success I Already done what the manual says but It doesn't have examples in Pro Tools Any Clue? Quote Link to comment Share on other sites More sharing options...
zolko60 Posted February 8, 2018 Share Posted February 8, 2018 Don't use Midi track for it cause HxN has no midi. Assigned knob should be seen on automation list for the audio track (stripe) where HxN was inserted. Quote Link to comment Share on other sites More sharing options...
soundog Posted February 8, 2018 Share Posted February 8, 2018 As @zolko60 sez, use Pro Tools automation lane, not Midi. If you haven't automated before, do a search on "pro tools plugin automation", there are plenty of tips. After you've assign your parameter control knobs and switches in Helix Native, they'll appear as (for example) Knob 3 or Switch 5 in Pro Tools' list of available automation parameters. You have to keep track of which switch is which switch, b*tch. And, if you make changes later, you'll have to re-do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.