Jump to content
Sign in to follow this  
caneparelli

Output Main's encoder

Recommended Posts

Hello,
I would have a problem. I bought the M20d from a friend, but the general volume knob does not run very well. is it possible to assign the main outputs to the other encoders? I can only do this if I assign a monitor, but not the general outputs.
Thanks to those who will help me.

P.S. excuse my english ...

Share this post


Link to post
Share on other sites

No, you cannot reassign the Mains volume to another encoder. But if you use the Fader view you can control it with your finger on the Main Outs slider, available in the Outs tab in Fader view.

Share this post


Link to post
Share on other sites

No, you cannot reassign the Mains volume to another encoder. But if you use the Fader view you can control it with your finger on the Main Outs slider, available in the Outs tab in Fader view.

Thanks so much, but I had already tried with the touch slider.

but at what speed should you turn the volume encoder to work like the smaller encoders?

Is this a hardware problem or I did not understand how to turn the knob?

 

Paolo C.

Share this post


Link to post
Share on other sites

I find that the main volume knob reflects the graduated scale of the readout. It needs a lot of turning at low levels and becomes more sensitive, needing smaller turns, as the level increases. That is normal behaviour.

  • Upvote 1

Share this post


Link to post
Share on other sites

Trovo che la manopola del volume principale rifletta la scala graduata della lettura. Ha bisogno di un sacco di svolte a livelli bassi e diventa più sensibile, necessitando di curve più piccole, man mano che il livello aumenta. Questo è un comportamento normale.

 

I find that the main volume knob reflects the graduated scale of the readout. It needs a lot of turning at low levels and becomes more sensitive, needing smaller turns, as the level increases. That is normal behaviour.

 

THANKS, thanks, tonight I'll try !!!

 

P.S. it's possible customizer icons with personal icons?

Share this post


Link to post
Share on other sites

There is definitely a hardware issue on some units that cause the jumpy main level control.

If you are running the latest firmware you can open fader view and control the mains there.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...