Jump to content
dkleiner

Is the Variax Digital Cable Simply an RJ-45 Cable?

Recommended Posts

Get the VDI cable.

The cable that came with the guitar is for connecting to the computer for Firmware updates

and Workbench/Workbench-HD, and not ment for playing through. The VDI cable is.

 

And should be available on the web-store or Full Compass.

 

Share this post


Link to post
Share on other sites

A standard RJ-45 cable is not gig worthy, or even regular-use worthy. You need to get a cable that has the protective housing at each end. A regular RJ-45 cable does not fit securely enough in the jack; it wiggles and will damage the pins inside the jack.

Share this post


Link to post
Share on other sites

If you want an alternative to the Line6 VDI the more generic name is ethercon, but you still need to find a soft flexible one for it to feel like a guitar cable

  • Upvote 1

Share this post


Link to post
Share on other sites

Does anybody have a specific recommendation for a source of a nice flexible cable? I have one already but it is just to darn stiff, it annoys me.

Share this post


Link to post
Share on other sites

I was looking for something more rugged than the Line 6 VDI. When I owned an AXE FX II, I had an an ethercon cable custom made to go to the foot controller.

 

Thanks for the clarification.

Share this post


Link to post
Share on other sites

I was looking for something more rugged than the Line 6 VDI. When I owned an AXE FX II, I had an an ethercon cable custom made to go to the foot controller.

 

Thanks for the clarification.

The link above is not the L6-made cable...you can beat the daylights out of it.

Share this post


Link to post
Share on other sites

The line 6 cables are 29.99 on eBay all day long

 

I picked up an extra...

Share this post


Link to post
Share on other sites

I have an older Line 6 VDI cable that came with my guitar, (not the dongle one), and a newer one I bought online. The newer one is a little thicker. I've been using that one for close to a year, dragging it around gigs, rehearsals and generally stomping all over it. I've never had a problem with it and it coils as well as any other guitar or mic cable I own. I keep the older one as a spare, but I've never needed to use it. I think if you buy a current Line 6 cable, you'll be pleased with it.

  • Upvote 1

Share this post


Link to post
Share on other sites

Mine is a RJ45 which I made myself and put a snagless strain relief flush boot. It's a bit fiddly to remove it from the JTV but I use a plastic spudger which really saves me a few quid and I can replace my cable with any length of cable at anytime. 

 

https://www.netshop.co.uk/products/rj45-snagless-strain-relief-flush-boot-grey-65mm?gclid=Cj0KCQiAwKvTBRC2ARIsAL0Dgk1uRgge-SQFj9p9NDuE3N7XdSGHWgYtFe4vKKF8ZtGPahqmwUw6U7saAl_PEALw_wcB

 

https://www.ebay.co.uk/i/271828235499?chn=ps&adgroupid=52137191441&rlsatarget=pla-380309513011&abcId=1129946&adtype=pla&merchantid=101769850&poi=&googleloc=9045724&device=c&campaignid=974961043&crdt=0

Share this post


Link to post
Share on other sites

When I got my New Variax, I hated the short Cable that came with the guitar since I play guitar and keyboard and need a longer one. So I said I will use a RJ-45 Cable that is longer. This is not a good idea because not all Rj-45 cables are shielded. My Helix squibble strips did not like it and I had to send my unit back for a new power supply. Not knowing what caused this, I plugged my Rj-45 back in and all worked fine until I booted my helix up the next day and the same thing. I called Line 6 back up which has customer support that no one beats, together we figured out what the problem was. I did complain about the short cable that comes with the guitar and now I just use a guitar cable until I can get a long shielded correct cable. So beware new Variax users. An unshielded RJ-45 will mess your squibble strips up.

Share this post


Link to post
Share on other sites

..... I did complain about the short cable that comes with the guitar .....

The cable that comes with the guitar is not intended to be used as a VDI cable. It is intended to be used only for Variax firmware updates or for Workbench HD, along with the Variax hardware interface device that also comes with the guitar.

Share this post


Link to post
Share on other sites

The cable that comes with the guitar is not intended to be used as a VDI cable. It is intended to be used only for Variax firmware updates or for Workbench HD, along with the Variax hardware interface device that also comes with the guitar.

That is good to know, but most think it is for both. My thought is add 10 dollars to the guitar and give a 20 ft cable. It is just common sense. Line 6 goes out of their way with customer service so hopefully they will pick up on this. To everyone out there, do not use an RJ-45  Network cable. You can buy a long VDI cable at Sweetwater for $30.00

Share this post


Link to post
Share on other sites

That is good to know, but most think it is for both. My thought is add 10 dollars to the guitar and give a 20 ft cable. It is just common sense.

I would have liked a cable to come with mine too, but you gotta think like a company...what "makes sense" for them is to spend as little as possible, while getting you to buy something else for 30 bucks. They can't assume that the majority of Variax owners also own another compatible L6 device to plug it into...some do, some don't...and as such, this is not likely to make it past the bean counters. From their perspective, they'd be wasting a bunch of money on cables that would never get used.

Share this post


Link to post
Share on other sites

The point is moot for me, the OP-I returned the Variax. It wasn’t for me. Consequently, I have a new Line 6 VDI cable for sale.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×