EugenCaraiani Posted February 14, 2018 Share Posted February 14, 2018 So I use for Helix for more them half a year I think so I know how to use it and I know that to change between those two you need to step hard enough on the pedal, and it worked good till this monday. Now it does not change as good as it did. I have to push a lot harder and even when I do it doesn't switch in most of the times. And when it does there is also a problem that I see that it changes for a moment and then goes back like I pushed it twice(which, of course, didn't). Couldn't find anything on this topic by myself, so hope someone can help me with this. Quote Link to comment Share on other sites More sharing options...
spikey Posted February 14, 2018 Share Posted February 14, 2018 Are you using a Mission SP1-L6 pedal? If so, that switch can be adjusted by loosening and re-tightening the nuts. I have mine set to a hair trigger. As far as not switching now, use your fingers and switch it. If it switches this way it's just an adjustment that needed. 1 Quote Link to comment Share on other sites More sharing options...
VirtualGuitars Posted February 14, 2018 Share Posted February 14, 2018 Have you tried cleaning the pedal? Quote Link to comment Share on other sites More sharing options...
EugenCaraiani Posted February 14, 2018 Author Share Posted February 14, 2018 Have you tried cleaning the pedal? No, I will try it as soon as I can, just didn't think about it. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.