Jump to content
Sign in to follow this  
jmcecil

Alternating Switching question

Recommended Posts

I've been working on some 2 preamp patches.  Lane 1 is all mono.  Lane 2 is all stereo.  preamp 1 panned hard left.  preamp 2 panned hard right.

The two delays are set 100% wet, with 1 repeat, at anywhere from 30 to 50ish ms.  It gives a great wide sound. However, it sounds completely different if the 'dark' amp is the delayed amp than if the 'bright' amp is the delayed amp.  Both ways sound great to me, but it does sound very different.  Also, having both off sounds really fat, but obviously more centered and direct.

 

My question

As you can see it was easy to set up to have Simple Delay Left and Right on switches.  But what I really want is for one to go off when I turn the other on.  Also, I want to be able to have both off.  I can't figure out a simple setup to accomplish this (other than snapshots of course).  Is it possible and I'm just missing something obvious?  I can do the tap dance of off/on .. both on being identical to both off as long as the delay is the same.

 

post-2404053-0-69105100-1520633635_thumb.jpg

Share this post


Link to post
Share on other sites

  But what I really want is for one to go off when I turn the other on.  Also, I want to be able to have both off.  

You can't do it both ways with just a single stomp

Share this post


Link to post
Share on other sites

Thanks for the response. Can the same switch toggle one on as it turns the other off? I thought you could control two things using merge, but I can't get it to work.

Share this post


Link to post
Share on other sites

Thanks for the response. Can the same switch toggle one on as it turns the other off? I thought you could control two things using merge, but I can't get it to work.

 

Yes. Assign them to the same FS then save the preset with one of them on and the other off. Henceforth the FS will toggle between them, turning one on and the other off alternately.

Share this post


Link to post
Share on other sites

Yes. Assign them to the same FS then save the preset with one of them on and the other off. Henceforth the FS will toggle between them, turning one on and the other off alternately.

hmm... I've been trying and I can't get it to work.  I'll keep trying.

Share this post


Link to post
Share on other sites

And of course, 2 seconds after my post I figured out what I was doing wrong.  The toggle is working.  Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...