Fenderflame28 Posted March 31, 2018 Share Posted March 31, 2018 Hi All just in case anyone here is looking to sell, I'm looking to buy... thanks david Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted April 1, 2018 Share Posted April 1, 2018 There are a few on eBay at the moment... Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted April 1, 2018 Author Share Posted April 1, 2018 24 minutes ago, Matt_Brown said: There are a few on eBay at the moment... Thanks Matt, but not in Mid Sussex... Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted April 3, 2018 Share Posted April 3, 2018 They usually have them at Anderson’s in Guildford. That’s where I got mine. Ok I bought new but they have had / can get 2nd hand if that’s what you want... Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted April 5, 2018 Author Share Posted April 5, 2018 Thanks Matt, I'll keep an eye out for a second hand one there, GAK and Guitar Guitar. Can't really justify new £££. Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted April 6, 2018 Share Posted April 6, 2018 No, they drop from like £600 to £250! Big shame as they are great amps. I’ve seen one in St Albans but I’m guessing that’s too far? Not too much petrol from where you are though... Quote Link to comment Share on other sites More sharing options...
Meisterjager Posted April 6, 2018 Share Posted April 6, 2018 I bought the one from St Albans last night! Also snapped up the 1x12 cab from Dartford. I really wanted the head and cab that was near Bristol, but I ended up snagging these both for a bit more, but they're far more local. Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted April 7, 2018 Author Share Posted April 7, 2018 I nearly pulled the trigger on that one in St Albans but logistics weren't good for me. Glad it's gone to a good home. My search continues... Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 3, 2018 Author Share Posted May 3, 2018 GAK to the rescue! £329 for a second hand one, being delivered on Saturday. expect lots of head-scratching and banal questions... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 3, 2018 Share Posted May 3, 2018 Nice. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 3, 2018 Share Posted May 3, 2018 Mid Sussex, as opposed to Middlesex? Been to Greenford. Enjoy. Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 4, 2018 Author Share Posted May 4, 2018 The name Middlesex is derived from the old English 'Middle of the Saxon kingdom'. We also have Essex (East Saxon), Wessex (West Saxon) and Sussex (South Saxon). I live in the middle of the South Saxon kingdom., quite different from the south of the Middle Saxon kingdom. Strangely we don't have a Norsex - no-one knows why... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 4, 2018 Share Posted May 4, 2018 Wonderful. It's all my fave place to hang about,... London, the Midlands and all. Have a friend and colleague in Colchester at University there in Essex. Cheers. Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted May 5, 2018 Share Posted May 5, 2018 Yay, so, will you be using it with a POD? Variax? Etc. Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 7, 2018 Author Share Posted May 7, 2018 HD500x and JTV '59 along with a 1983 Fender Flame and a partscaster tele. I have a gig on Friday this week so won't have time to set up all my patches for L6 link with any confidence beforehand. I'll go 4CM for now as the pod is already set up for that. The plan is that the DT25 replaces an ageing Mesa Nomad. Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted May 7, 2018 Share Posted May 7, 2018 Sounds like a good call. if you are using the ‘59 for acoustic stuff there is a good patch called Acoustic DT based on a patch by Rads that I modded so it also has an ‘out’ to the PA through the effects loop (whilst maintaining a decent enough stage sound). Experiment with pre and full amps as some seem to sound better one way and others err, the other. I used a high quality mic lead for L6 before ‘upgrading’ and whilst I’ll probably start a whole new thread by saying this, I don’t personally notice any difference! Maybe my gig-shot ears before someone jumps down my throat! lastly, gigging anywhere near Bromley? Might come and see you! Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 7, 2018 Author Share Posted May 7, 2018 OK, it's arrived, I've plugged in and this does not look or sound right: The cracks and pops you hear are what I heard. Really loud for the last two seconds hence I stopped recording and switched it off. I'll be in touch with the seller tomorrow to see what they say. Anyone here had this? If it's the valve should I get the seller to pay for re-biasing or if I just go with an Electro-harmonix one is it bias free? I come from 'Mesa-land' where we just buy the right valve and never need to bias. Thanks Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted May 7, 2018 Share Posted May 7, 2018 Mine doesn’t / hasn’t done that... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 7, 2018 Share Posted May 7, 2018 That tube is "red plating",... shut it off, keep it off until it goes into the shop. Output transformer and relays, plate resistors will have to be checked by a factory authorized tech who knows the insides. E&M in Milton Keyes, or my mate Mark Wright Music in Northampton. Mark used to be my opposite number at Line 6 Rugby, when we had a location there. He knows this stuff as well I do. What tubes are in it? The Brand and numbers, what are they? What are the Ip and Gm numbers on each of the power tubes? -->These power tube sets need to be biased. Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 7, 2018 Author Share Posted May 7, 2018 Hi. Thanks for the response, and the questions. The EL84s look to be Electro Harmonix EL84EH tubes but the text has worn off them and numbers are unreadable. The other tube is Electro Harmonix 12AX7EH 1305. Serial number on the amp is (21) A913M6145001809. Not it sure how old this makes this amp? If they are the original tubes then a re-tube and bias should certainly be in order. I bought it used from a reputable UK dealer (GAK) and have 14 days return if there are issues. I'm thinking there's no way they will FOC the checks you list above. I'll ask them tomorrow and then return it to them if they won't play ball. I'll let you know how I get on. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 7, 2018 Share Posted May 7, 2018 Are you able to read the Ip and Gm numbers on the power tubes? Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 8, 2018 Author Share Posted May 8, 2018 No, I'm afraid not, the printing is unreadable. It's only because I know what the Electro Harmonix logo looks like that I know it's an EH at all... this is is the one that red-plated. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 8, 2018 Share Posted May 8, 2018 Good thing the glass didn't pucker-in. Those connection show some carbon scorching. The plate resistors, load resistors, and output transformer will need to be checked by an authorized service tech who know the product. Quote Link to comment Share on other sites More sharing options...
Fenderflame28 Posted May 10, 2018 Author Share Posted May 10, 2018 GAK have given me great service (three cheers for Roy) and have collected the amp to send it off for repair. They will then offer me the option for a refund or keep the amp depending on what the tech comes back with... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 10, 2018 Share Posted May 10, 2018 Good start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.