cliffordstevens Posted April 12, 2018 Share Posted April 12, 2018 I have an Amplifi TT that I love...would the new PowerCab 112 Plus make sense as a way to play it out loud? And if so, what is the recommended way to connect it up? Quote Link to comment Share on other sites More sharing options...
EvilJ Posted April 8, 2020 Share Posted April 8, 2020 What did you end up doing for the Amplifi TT? I'm looking at Powercab 112 Plus or Laney LFR 112. Quote Link to comment Share on other sites More sharing options...
smacar01 Posted October 16, 2020 Share Posted October 16, 2020 Any answers on this community? Tonight I hooked up my new FBV3 to the Amplifi-TT to the PowerCab as it says in the instructions, but the volume was extremely low even with the volume on the PowerCab turned up to the max. My guitar is connected to the Amplifi TT. I must be doing something wrong. I'm going to search the internet, read the manual, etc. Do you have any videos or information to share on the subject? Quote Link to comment Share on other sites More sharing options...
bobcoss Posted October 30, 2020 Share Posted October 30, 2020 You can control the gain to the input of the PowerCab. I've used a variety of different modelers into the PC+ 112, and I sometimes have to bump up the gain (input level) for the input I'm using. For example, I was using a Mooer GE150 into the PC+, and it only has output at instrument level. That's not enough signal out of the box into the PC+ to get really loud, so I simply bumped up the gain (input level) for the 1/4 on the PC+ until I was getting the indicator to hit yellow and an occasional flash of red when I dig in. Bob Quote Link to comment Share on other sites More sharing options...
smacar01 Posted October 30, 2020 Share Posted October 30, 2020 I spoke with the Support Team at Line 6. You need to connect the PowerCab to the Amplifi-TT Main Outs Left jack and NOT the Amp Out jack. Make sure you have the best sound and good balance (PowerCab Volume LED turning Yellow), press the Master Volume knob on the Amplifi-TT to activate its Secondary Function, then set your guitar level up as high as desired. The setup sounds awesome! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.