Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Wah range pod xtlive


Recommended Posts

  • 3 months later...

Q: How do I calibrate the pedal on my PODxt Live?
A:
1. Make sure there is nothing connected to your PODxt live aside from the power cable.
2. Power up the PODxt Live while holding down the Bank Up pedal
3. Press the Amp pedal (this will reset the current settings)
4. Move the pedal all the way to the heel back position, then all the way forward until the toe switch clicks. You will want to stand up and shift all of your weight to the toe position until you see the WAH light turn on.
5. Wait 10 seconds, then power the PODxt Live off and back on again.
6. Your pedal is now calibrated.

 

If you don't want the full range, don't move it all the way back or forward. Look at the MAPPED field for the value between 0 and 127. 

 

Dave

www.daveshomestudio.com

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...