Phil110567 Posted May 31, 2018 Share Posted May 31, 2018 Hi there ! I'm considering to use the 4CM (4 cables method). That's for the 4CM and the switching capabilities that I bought the HX in the first place. I understand 4CM method very well. "Send" is used to send guitar signal to amp input. "Retrn1" is used to receive Preamp signal back from the amp. Out is used to send the effected signal to the POWER amp. This is clear and well documented but I have a concern with LEVEL settings : In the manual, it said that the Send/Retrn1 may be setup to accommodate either Instrument or Line level FxLoop. It's cool but in case of the 4CM, if your amp has a non-buffered loop, one part (send) should be setup to "Instrument" and the other should be setup to "Line". Of course this is not possible as send and return have to be setup together. What do you think of this problem ? Have you ever heard of a it ? Any workaround to suggest (except using a buffered loop!) ??? Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.