Jam_Sandwich Posted July 18, 2018 Share Posted July 18, 2018 Hi. I can't load IR's into my Helix using HX Edit. Both are the current firmware. I click load IR, or attempt to drag them in, it indicates I have tried to do it, and the slot lights up, it gives me a percentage until completion if I load multiple ones, but they all just come up as EMPTY and they just won't load. Any ideas why? Thanks. Quote Link to comment Share on other sites More sharing options...
datacommando Posted July 18, 2018 Share Posted July 18, 2018 2 hours ago, Jam_Sandwich said: Hi. I can't load IR's into my Helix using HX Edit. Both are the current firmware. I click load IR, or attempt to drag them in, it indicates I have tried to do it, and the slot lights up, it gives me a percentage until completion if I load multiple ones, but they all just come up as EMPTY and they just won't load. Any ideas why? Thanks. Hi, AFAIK, this is usually a consequence of a mismatch between the version of the firmware in your Helix and the version number of your HX Edit software. It’s sometimes happens if you have a shortcut to a previous copy of HX Edit on your computer and you are mistakenly opening that one. Please check both are on v.2.60, it’s easily missed. If it’s an old copy - delete it. If that is not the issue, then are the IR’s commercial ones that you have used previously, or new (freebie) ones picked up from the internet? It would help to know. Hope this may help. Quote Link to comment Share on other sites More sharing options...
Jam_Sandwich Posted July 18, 2018 Author Share Posted July 18, 2018 I fixed it. It seems the program I was using was called Helix. Not HX Edit. I don't know really. I just uninstalled and installed that and it's working fine now. :) Quote Link to comment Share on other sites More sharing options...
datacommando Posted July 18, 2018 Share Posted July 18, 2018 14 minutes ago, Jam_Sandwich said: I fixed it. It seems the program I was using was called Helix. Not HX Edit. I don't know really. I just uninstalled and installed that and it's working fine now. :) That’s good to know, have fun! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.