vazman2 Posted July 29, 2018 Share Posted July 29, 2018 What I'm essentially trying to do is run a path into my recto with a 4 cable method using the 1/4" outputs, and run a separate path through a model using the XLR outputs. But every time I set the output of the model path to the XLR the signal for the 1/4" outputs just cuts out. I'm not running out of DSP. Has anyone tried this before? Any help would be greatly appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
kylotan Posted July 29, 2018 Share Posted July 29, 2018 You should be able to have 1 path going to 1/4" out and 1 path going to XLR out, sure. This is how some people have the Helix process their guitar and their vocals simultaneously. Can you show the patch you're using? Quote Link to comment Share on other sites More sharing options...
vazman2 Posted July 29, 2018 Author Share Posted July 29, 2018 I'll take a pic tonight. I do have each path going to those separate outputs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.