bshaw92 Posted August 7, 2018 Share Posted August 7, 2018 I have a PRS P245 that I would like to use through the HX to reduce the additional pieces I currently use. The setup would be to go into my amp with the electric and use the Fx Loop back into the HX - Easy. (FYI - I then go out of the amp into a loadbox and into an IR to FOH. If the HX could be setup to also allow that line out back into the HX then out to FOH that would add more icing to the cake). Simultaneously I would run the piezo side into the HX using an eq and an acoustic IR then out to the FOH. I would use both at the same time and switch back and forth many times. Anyone with a similar setup that can provide a "best way" or at least confirm that this can be done? I can't use the edit software with the HX and I don't have the HX until the end of the week. Pre planning the setup to expedite the process. Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.