daveparks6842 Posted August 20, 2018 Share Posted August 20, 2018 Recently used my Pocket Pod to connect to the PA at our church. I used the 1/4" output to a DI box to connect to the church's Behringer x32 digital mixer. The church sound engineer commented that he needed to boost the gain significantly since there didn't seem to be a lot of signal from me, but I'm trying to figure out why. What settings on the Pocket Pod control the level on the 1/4" output? I checked the master volume setting and it was all the way up. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
daveny5 Posted August 21, 2018 Share Posted August 21, 2018 Use the Direct Out from the Pocket Pod. The Amp Out should go to your guitar amp. From the Pocket Pod reference manual: Amp Out – This is a mono 1/4-inch output that is perfect for connecting your Pocket POD to a guitar amp which has a pre-amp. Direct Output/Phones – This is a stereo 1/8-inch output for headphones, a P.A. or recording device. You may need to get a 1/4" to 1/8" phone adapter plug like this one: https://www.amazon.com/Hosa-GMP113-Inch-Female-Adaptor/dp/B000068O47/ref=sr_1_18?ie=UTF8&qid=1534817042&sr=8-18&keywords=phone+to+mini-phone+adapter Dave http://www.daveshomestudio.com 1 Quote Link to comment Share on other sites More sharing options...
daveparks6842 Posted August 31, 2018 Author Share Posted August 31, 2018 Thanks. But since the X32 input is a three wire microphone input, I still need the direct box, right? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.