Jump to content
Sign in to follow this  
GuyDubus

Helix and L3M

Recommended Posts

What setting do I use to get the best sounds ?

Helix through Line 6 digital L3M.

Do I use setting PA or Electric Guitar ?

 

Share this post


Link to post
Share on other sites

The silly answer is try both & you choose, but if there is more than the Helix going through the speaker I would use the PA setting. 

 

  • Upvote 1

Share this post


Link to post
Share on other sites

Very timely. I just bought a second hand L3M and I’m having some trouble with it. 

 

In electric guitar mode it sounds excellent with the Helix plugged straight into the L3M. 

 

If I plug a music source into it, such as my phone, it sounds great in PA/Reference mode. Also, if I plug my electronic drum kit  into it on PA mode it also sounds excellent. 

 

However, if I switch it to monitor or PA mode and plug the guitar into it any distorted guitar settings sounds dreadful. It sounds raspy and tinny and is unusable. Clean sounds are mostly  fine. 

 

I bought the speaker to jam with some friends and have a Yamaha analogue mixer so figured I could set it to PA/Reference mode and connect us all to it via the mixer. I’ve compromised a bit by leaving it in electric guitar mode and tinkering with the mixer and the drum module to get a good sound out of the drums. However, I figure I must be doing something wrong.

 

Any suggestions? 

 

 

 

 

Share this post


Link to post
Share on other sites
16 hours ago, Urmph said:

Very timely. I just bought a second hand L3M and I’m having some trouble with it. 

 

In electric guitar mode it sounds excellent with the Helix plugged straight into the L3M. 

 

If I plug a music source into it, such as my phone, it sounds great in PA/Reference mode. Also, if I plug my electronic drum kit  into it on PA mode it also sounds excellent. 

 

However, if I switch it to monitor or PA mode and plug the guitar into it any distorted guitar settings sounds dreadful. It sounds raspy and tinny and is unusable. Clean sounds are mostly  fine. 

 

I bought the speaker to jam with some friends and have a Yamaha analogue mixer so figured I could set it to PA/Reference mode and connect us all to it via the mixer. I’ve compromised a bit by leaving it in electric guitar mode and tinkering with the mixer and the drum module to get a good sound out of the drums. However, I figure I must be doing something wrong.

 

Any suggestions? 

 

 

 

 

Try experimenting with Helix presets that do/don't use a mic/cab/IR block. Theoretically when you set the L3 speaker to Elictric Guitar mode you can do without a Helix mic/cab/IR block since the speaker setting simulates that. When the speaker is set to PA or Monitor mode you should use the Mic/cab/IR block in the Helix preset.

 

But there are no rules...... experiment with the Helix preset (EQ, amp bias, cab Lo/Hi cut, mic selection, ...) until you get a good sound with the speaker in PA mode. That's the mode I would use if you're using a mixer and other sound sources are in play.

Share this post


Link to post
Share on other sites
On 10/5/2018 at 1:25 PM, silverhead said:

Try experimenting with Helix presets that do/don't use a mic/cab/IR block. Theoretically when you set the L3 speaker to Elictric Guitar mode you can do without a Helix mic/cab/IR block since the speaker setting simulates that. When the speaker is set to PA or Monitor mode you should use the Mic/cab/IR block in the Helix preset.

 

But there are no rules...... experiment with the Helix preset (EQ, amp bias, cab Lo/Hi cut, mic selection, ...) until you get a good sound with the speaker in PA mode. That's the mode I would use if you're using a mixer and other sound sources are in play.

 

 

Thanks. I’ve cured it. Would you believe it was a duff cable. In fact,  two duff cables both brand new. It seems in my various attempts at plugging it all together I only ever used the working cables when it was in guitar mode. A process of elimination found the issue. Weird. Everything sounds brilliant now. What a speaker the L3M is. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...