bhn1979 Posted September 22, 2018 Share Posted September 22, 2018 I want to buy Helix floorboard and connect a extra espression pedal. I have look at this one Mission Engineering SP1-L6H. What cable do i need and from which manufacturer ? Quote Link to comment Share on other sites More sharing options...
phil_m Posted September 22, 2018 Share Posted September 22, 2018 You need two TS-TS path cables. One cable goes from the pedal’s expression out to the Control’s EXP1 jack (or whatever EXP jack you want to use) and the other goes from the pedal toe switch out to the Control’s EXP TOE SWITCH jack. Quote Link to comment Share on other sites More sharing options...
bhn1979 Posted September 22, 2018 Author Share Posted September 22, 2018 Ok thanks Like Planet waves patch cable ? https://www.thomann.de/dk/planet_waves_pwp01.htm Quote Link to comment Share on other sites More sharing options...
phil_m Posted September 23, 2018 Share Posted September 23, 2018 17 hours ago, fornavnefternavn said: Ok thanks Like Planet waves patch cable ? https://www.thomann.de/dk/planet_waves_pwp01.htm You might find find those particular cables too short, but, yes something like those. I would think you’d want s little slack, so you’d probably 60cm cables as a minimum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.