dannepop Posted September 23, 2018 Share Posted September 23, 2018 Why should I use a power amp before I run the Helix into the L3t? What´s the benefits of this? What power amps would be the best choice? D Quote Link to comment Share on other sites More sharing options...
Rocco_Crocco Posted September 23, 2018 Share Posted September 23, 2018 You shouldn't. Just run Helix directly into the L3T. Quote Link to comment Share on other sites More sharing options...
rvroberts Posted September 23, 2018 Share Posted September 23, 2018 You can't plug the Helix straight into a speaker box. It needs a power amp. But the L3t is not a simple speaker box - it has it's own power amp. It is a 1400 watt power amp! - connected to speakers all in one box - that's why you wouldn't use a power amp - you already got one! And you can't connect a power amp to an L3t - that would be plugging an amp into the input of an amp - you'd probably blow them both up! Hope that clears up some people's understanding. Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted September 23, 2018 Share Posted September 23, 2018 6 hours ago, dannepop said: Why should I use a power amp before I run the Helix into the L3t? Three words: boom, fire, sirens. Don't do that... under any circumstances. You can't feed power into an already powered device that's expecting a line level signal. You'll destroy both units. Quote Link to comment Share on other sites More sharing options...
duncann Posted September 23, 2018 Share Posted September 23, 2018 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.