Hx Effects Question

[kenhill30]

Is this possible on the HX Effects? - I want to create two overdrive blocks. I will call them A and B. A will be on and B would be off by default. I would like to be able to press the foot switch on the A block and turn it off and simultaneously turn block B on. And I want to be able to press the foot switch on the A block again to turn the B block off while simultaneously turning the A block on. In other words, I want the A block to act as a toggle between the two overdrives. Thanks

[soundog]

Yes, its easy to do this sort of toggling between 2 blocks.

[larjim]

If you check the Signal Flow tutorial here, it explains how to set up a toggle. 

 

[Mozz_cl]

Yasss, i'ts possible. Indeed I've got a set of blocks in patch that is set like the following:
1 "Clean Channel": Minotaur as a Boost for a clean Amp

2+3 "Drive Channel": 2 is the Kinky Overdrive & 3 is the Teemah  

All of them are assigned to Switch #1, where Switch OFF (Clean): 1 , Switch ON (Drive): 2 + 3  - Attention to this detail. I've used 1 Swicth,  but 3 blocks. HXFX holds up to 9 blocks. Unit allows using 6 switches. 

Imho, If you are going to get it, I really recommend reading the manual, the whole manual, hopefully a couple of times. You'll find many answers there which will tell you if this unit is the proper one you need, or you need a different one (more/less blocks, or you really need to load amps, form factor, etc...) . That's what I did and don't regret purchase a bit, all the opposite, considering I was using only pedals.