Jump to content
thembones75

Helix LT Snap Shots/Screens?

Recommended Posts

 

I would like to be able to do this:

1. See all 8 possible presets when i step on bank up or bank down

2. when in a preset see the 4 snapshots for the preset on the top row

3. when in a preset see the 4 stomp boxes on botttom row

 

I am halfway there
I can do 2 and 3 but cannot do #1

When I hit bank up or down I only see 4 preset choices across the top row UNLESS I hit mode then do up/down

Is that the only way to do this?

 

Share this post


Link to post
Share on other sites

I'm stumped.... I would have expected it to work as you want it to with the preset mode set to "snap/stomp".... I guess the stomps in the preset mode are taking precedence over the presets... but I don't understand why.

 

Myself... I run the preset mode in 8 snapshot mode... and I get all 8 presets showing when I press up/down. After choosing  a preset it returns to whichever mode I was in, snap or stomp.  I don't have the LT with me at the moment so I can't try your scenario.... but I will try it when I get a chance. 

 

Just out of curiosity... are you running the latest firmware (2.7 at this time)? 

Share this post


Link to post
Share on other sites
17 hours ago, thembones75 said:

 

I would like to be able to do this:

1. See all 8 possible presets when i step on bank up or bank down

2. when in a preset see the 4 snapshots for the preset on the top row

3. when in a preset see the 4 stomp boxes on botttom row

 

I am halfway there
I can do 2 and 3 but cannot do #1

When I hit bank up or down I only see 4 preset choices across the top row UNLESS I hit mode then do up/down

Is that the only way to do this?

 

 

Helix Floor, 2.7 - that appears to be the way it works.

Share this post


Link to post
Share on other sites

Have you tried pressing bank up+down (F1+F7)  together and holding them for 2 seconds? That way you can cycle through different options for these bank swiches. It shows the mode on the screen, with a yellow exclamation mark signal next to it.

In performance view I’m using the mode switch  F6 to choose between 8 stomp mode and 8 snapshot mode. When I press bank up or down, it starts flashing 8 presets. So it should work.

Share this post


Link to post
Share on other sites
On 11/11/2018 at 1:12 PM, rd2rk said:

Helix Floor, 2.7 - that appears to be the way it works.

 

Yes... I finally opened up the Helix and gave the OP's settings a try... that's what it does! 

I find that strange. With 8 Snapshot mode (the way I run it) the up/down opens 8 presets to load. I would have thought that would always be the case if you altered the preset mode page. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×