DACMC2000 0 Posted January 17, 2019 Hi! I have a Spider V 120 watt amp that I have been using for the last one and a half to two years. Not under warranty anymore so I need help fixing this myself Here's what happened: -I turned on the amplifier and attempted to turn up the volume. It made an extremely loud distortion noise so I turned down the volume and shut the amp off. -I turned the amp back on, only to find out that my volume not does not work, and the amp will not produce sound from my guitar now. -I attempt a factory reset, but I press play instead of the correct button and drums start playing. I turn the amp off. And now the amp won't turn back on. When I attempt to turn it on, it displays the LED screen flashing with no words and does nothing. Thanks in advance! Quote Share this post Link to post Share on other sites
ADBrown 70 Posted January 17, 2019 I recommend trying to reinstall the firmware using a smart device or computer connected to the amp via USB. More info on updating can be found in the link below. If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. Quote Share this post Link to post Share on other sites
robwood68 0 Posted February 7, 2019 I’ve been using my spider 120 for 9 months fine but suddenly it’s not making any sound from my guitar.ive tried a factory reset and using brand new guitar leads it is still under warranty but I wanted to try and see if I could do it myself first Quote Share this post Link to post Share on other sites
ADBrown 70 Posted February 8, 2019 On 2/7/2019 at 10:10 AM, robwood68 said: I’ve been using my spider 120 for 9 months fine but suddenly it’s not making any sound from my guitar.ive tried a factory reset and using brand new guitar leads it is still under warranty but I wanted to try and see if I could do it myself first I recommend trying to reinstall the firmware using a smart device or computer connected to the amp via USB. More info on updating can be found in the link below. If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. If that fails, please contact support! Quote Share this post Link to post Share on other sites
eternoc70 0 Posted March 3, 2020 i played it 2 days ago shipped to a friend and now it will not turn on no lights nothing? line6 spider jam Quote Share this post Link to post Share on other sites