mmarino426 Posted January 17, 2019 Share Posted January 17, 2019 I've just been using the LT in the Effects Loop of my Friedman Runt 50, but today decided to try the 4CM to have some effects hit the front of the amp. When I hooked it up per the Line 6 Youtube video, I had a horrible (presumably ground) hum come through my speakers. I also hear what I would describe as a "Dry Signal" coming through the speaker as well when I switch to my distortion channel on the head at the same time. Here is my layout: See picture of the layout: I have Volume, Wah, Compressor, and OD before it goes to "Send 1", which then after that has Delay 1, Delay 2, Flanger, Boost, and Reverb inside the Effects Loop, then going to Return 1, then to 1/4" out. My connections are as follows: Guitar (Gibson Les Paul) -> Helix LT Guitar Input Helix LT Send 1 -> Friedman input (front) Helix LT Return -> Friedman Effects Loop Send Helix LT 1/4" Out -> Friedman Effects Loop Return All power cables are plugged into the same Furman power conditioner, and those are the only things being plugged into it. This is a closed loop system. Any help or advice would be appreciated! Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.