aggravation Posted November 22, 2013 Share Posted November 22, 2013 Can I have the 500x connected to a DT amp and also have the line out L/R into my audio interface and play through both? Not necessarily at the same time but to be able to switch between them without having to connect/disconnect....ground loop considerations etc. As for trying to use both at the same time....because I know if it can be done I'm likely to try it...if I set the 500x up as the audio interface instead, can I record to DAW using the USB and listen to the DT amp for monitoring? I know any given preset may not be optimal for the two very different paths but I use a TwoNotes Torpedo CAB in the 500x loop just after the amp block using the 'pre' amp sims with no cab so perhaps my presets will be worth trying in that fashion. I guess there is no way to have the effects loop active in the USB output but not in the DT signal path though... Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.