Bombasstard Posted February 26, 2019 Share Posted February 26, 2019 Hi there, the HX Stomp's manual says for the volume knob (7): "Turn this knob to control the main output and headphones volume". But on my device, it only affects headphone level - not the main outputs (12). Is there a global setting I miss? Any other one who has this problem? Firmware 2.71.0 Best Regards B Quote Link to comment Share on other sites More sharing options...
MikeBoth Posted February 26, 2019 Share Posted February 26, 2019 I think page 41 of the manual is what you are after. Check Global Settings -> Ins/Outs -> page 3, knob 2: ---- Determines which signal(s) are heard from the Phones output. Normally you would set this to "Main L/R." 2 Volume Controls Determines whether the top panel VOLUME knob controls both the 1/4" main output and headphone output ("Main+HP") or just the headphone output ("Phones"). When set to "Phones" the 1/4" main outputs remain at unity gain. 2 Quote Link to comment Share on other sites More sharing options...
Bombasstard Posted February 27, 2019 Author Share Posted February 27, 2019 Hi Mike, that sounds adequate - going to check that tonight. Thank you very much :-) Best regards, B. Quote Link to comment Share on other sites More sharing options...
Bombasstard Posted February 28, 2019 Author Share Posted February 28, 2019 Worked like you said. Thank you :-) Best regards, B. 1 Quote Link to comment Share on other sites More sharing options...
al-wizard Posted January 28, 2020 Share Posted January 28, 2020 Same trouble happend here! Thanks guys, you save me! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.