johnwinston13 Posted December 3, 2013 Share Posted December 3, 2013 HI, Can any one help me out with this?? Just bought a Matrix gt1000fx 2U rack amplifier to use with My new POD HD X. When I try to plug from the unbalanced output of my POD HD X to the input of my Matrix the Matrix does not receive a signal from the pod and no sound comes out of my cab. I tested all my cables and they are all fine. I then tried plugging the dry output Od my Pod into the Input of the matrix and it works fine. I receives a signal and sound comes out of my cab. Anyone can advise me on why I am not gettting a wet signal coming out of the unbalanced outputs on my POD HD X?? Tried bothe with the switch set to amp and to line...NADA no signal whatsover. Is this a settings issue?? I would really appreciate if someone could shed some light on this before I send it back to the store as not working.. Cheers Win Quote Link to comment Share on other sites More sharing options...
depurity Posted November 28, 2017 Share Posted November 28, 2017 Dude mine is doing the exact same thing!! It was working fine a few days ago while doing the 4CM and now ...NADA! All cables are good and connected as they should. Quote Link to comment Share on other sites More sharing options...
spaceatl Posted November 30, 2017 Share Posted November 30, 2017 Try your headphone output as a line input...Or just plug in some cans...If you have signal on the cans and nothing on the 1/4 outs, send it back... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.