ChristianBoddum Posted March 31, 2019 Share Posted March 31, 2019 Hi! I have basically all the setups I can imagine aside from one, and it is very needed, not just for me ;-) I have attached a PDF showing where I would like to tap signal to the jack outs. In order to use the full stereo potential of the Helix including programmed panning, you have to make 2 dedicated outputs, in my case XLR. I usually have send blocks on 3/4 after the IR's for editing, monitoring, and recording purposes, But I still need the possibility of sending a signal pre-IR's to drive amp line inputs. So I have to double up all the presets with alternative outputs.... ! alot of work and space required. If you could tap the signal to the 1/4" jack outs like on my example, the Helix would be even closer to perfect ;-) Kind regards - Christian Boodum 31-03-2019 Jack outs option Line6 Helix - Chr. Boddum.pdf Quote Link to comment Share on other sites More sharing options...
Kilrahi Posted March 31, 2019 Share Posted March 31, 2019 Keep in mind, Line 6 is unlikely to ever see this idea here. You should post it on Ideascale. Quote Link to comment Share on other sites More sharing options...
ChristianBoddum Posted March 31, 2019 Author Share Posted March 31, 2019 Right on, I wasn't all awake here ;-) But ideascale doesn't have the option of adding PDF's and pictures, as far as I can see.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.