glideman Posted April 29, 2019 Share Posted April 29, 2019 4 snaps, 4 stomps, 3 amp models. 1. Clean 2. Crunch/slight breakup 3. Classic/hard rock/lead 4. Heavy/lead All I did was run through all the other cab models and ended up saving 3 more versions. Didn't even change default Mic models. While I knew this would happen, I've just been in "if it ain't broke, don't fix it..." mode. Plus, I've been piddling with the Axe FX 3 to get it ready for gigging. Needless to say, I'm excited to try out my 3 new versions of Old Faithful at this Saturday's gig! I think it speaks volumes that I've been using the same presets for the most part for around 2 years. LoL! Quote Link to comment Share on other sites More sharing options...
themetallikid Posted April 29, 2019 Share Posted April 29, 2019 thats very cool. I've been using my 'core' presets for better part of almost 9 months. Few changes here and there to how I'm boosting them at times...,but that is more of a feel rather than tone thing. Can I ask to share the details of your 'rig' in the presets and what you have your stomps/snaps/amps set to. I dont need exact settings as that is always a variable that will never translate from one to another...but curious on how you structure and control the snaps/stomps and get the variance in tones mostly. If you dont want to share publicly feel free to pm me, and if not at all, I can respect that as well for sure!! Quote Link to comment Share on other sites More sharing options...
glideman Posted April 30, 2019 Author Share Posted April 30, 2019 I'd pop a screenshot, but it's basically a Glenn Delaune 3 amp snapshot that I really liked the layout of. Probably copyright problems if I did that publicly. Everything was completely set to my preferences (he used all MkV amp model/channels, I threw an Archon channel in for the heavy/lead 4th snapshot). I think I may have changed the one kicker dirt pedal from the original, but I'm not 100% sure. Here's a nice ASCII stick diagram... LoL!!!!! Snap 1 is CalRyth1 for clean, one of the delays is on and switchable with a stomp. Snap 2 is CalRhyth2 with lower gain and no TS808. I keep the Del off unless I need it for a lead. Snap 3 is CalRhyth2 with higher gain and the TS808. I keep the Del off unless I need it for a lead or something. Snap 4 is ArchLead... and it cranks. Very much! but warm and toasty! I think only one snapshot has a change on an EQ block. 4 stomps are CleanBoost (one of the EQ's), Phaser, Chorus, and Delay. >>>>>>>>>>-----DlxComp------Wah--------DlxPhaser-----------UbiqVibe------------Scrm808-----------CaliRhyth2-----------ArchLead--------->>>>>>>>>>| V | V X>>>>>>>>>---CalRyth1----CabRino------SimpEQ--------SimpDelay----|--------|-------TrinChor-----VintDigDelay----ChamberVrb-------Vol---->>>>>>> | | |------------------------------------------------------------------------------------------------------| |-----------------------------------------------------------------------------------------------------| | | |-------------------------------------------------------------------------------------------------------------------SimpEQ-----SimpDelay-------SimpDelay---------------------------------------| Quote Link to comment Share on other sites More sharing options...
themetallikid Posted April 30, 2019 Share Posted April 30, 2019 ok, that's basically what I was picturing in my head. Thank you for sharing some of the guts. I just enjoy trying different setups and exploring if they work better for me and while doing it from scratch can be rewarding as well, I usually need a jumpstart to explore and get it setup or at least have something to work towards. Thanks again! Quote Link to comment Share on other sites More sharing options...
glideman Posted April 30, 2019 Author Share Posted April 30, 2019 It's a very flexible layout... and things can easily be replaced/changed/shuffled. Quote Link to comment Share on other sites More sharing options...
jpdennis Posted May 2, 2019 Share Posted May 2, 2019 Nice. Thanks. Now I have to go back to the drawing board! ;-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.