ollerenshawian Posted May 13, 2019 Share Posted May 13, 2019 Hi, not sure if this is finger trouble on my part but don't seem to be able to get the foot switches to operate by touch ! i have been into "Global settings' and selected foot switches then turned the 'Touch select' to on but you still need to press them until they click . they do not appear to be touch sensitive ??? am i doing something wrong ? Thanks in anticipation, Ian Quote Link to comment Share on other sites More sharing options...
phil_m Posted May 13, 2019 Share Posted May 13, 2019 The touch feature isn't the same as actually clicking on the footswitches. It's there for the purposes of assigning blocks to footswitches and then quickly navigating to them after assignments are made. There are few other functions that can be done with the touch feature, well. Quote Link to comment Share on other sites More sharing options...
ollerenshawian Posted May 13, 2019 Author Share Posted May 13, 2019 Thanks phil_m that makes sense now, !! Quote Link to comment Share on other sites More sharing options...
schuha_at Posted May 16, 2019 Share Posted May 16, 2019 I have deactivated Touch select. I had some peculiar changes in my setup (e.g. the assignment of the buttons Preset/Snapshot), which I attribute to this function. This assignment has not changed since I deactivated it. Thank God it was a rehearsal when it happened to me and not a GIG. If one is not yet so familiar with the helix, one would probably sweat. Quote Link to comment Share on other sites More sharing options...
ackmaal Posted May 18, 2019 Share Posted May 18, 2019 I want to disable the touch feature, I always inadvertently touch a footswitch by mistake and move the page Im working on. But for the life of me I cant figure out how you can turn this off on the stomp. Can someone tell me how to turn this off (it's not in the manual either). Thanks Quote Link to comment Share on other sites More sharing options...
Kilrahi Posted May 18, 2019 Share Posted May 18, 2019 13 hours ago, ackmaal said: I want to disable the touch feature, I always inadvertently touch a footswitch by mistake and move the page Im working on. But for the life of me I cant figure out how you can turn this off on the stomp. Can someone tell me how to turn this off (it's not in the manual either). Thanks It IS in the manual. I don't have either the Stomp or the manual handy right now, but it's in global settings I think under footswitches. You can set it to touch, press, or both. You want press. Quote Link to comment Share on other sites More sharing options...
lungho Posted May 18, 2019 Share Posted May 18, 2019 18 hours ago, ackmaal said: I want to disable the touch feature, I always inadvertently touch a footswitch by mistake and move the page Im working on. But for the life of me I cant figure out how you can turn this off on the stomp. Can someone tell me how to turn this off (it's not in the manual either). Thanks It's in the manual....at the top of Page 42, under Global Settings > Footswitches When set to "Touch," touching a Stomp mode switch selects its assigned item(s) but pressing doesn't. When set to "Press," pressing a Stomp mode switch selects its assigned item(s) but touching doesn't (helpful if you insist on playing barefoot). When set to "Both," either touching or pressing will select the assigned item. The default is "Touch." Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.