Jump to content
enjalt

Compatibility Helix / Variax 700

Recommended Posts

 

Hello,

 

I would like to know if anyone has already tested the compatibility between Helix and a Variax 700.

 

And if so what does work / does not work?

 

Thanks for your replies

Share this post


Link to post
Share on other sites

I have tested with a Variax 300 which should behave the same as a 700. I've found that the communication only works one way - from Helix to the Variax. So you can, for instance, store and recall the Variax model properly using a Helix preset. However any changes you make on the guitar are not properly received by Helix.

 

The older Variax guitars are not officially supported by Helix so there's no predicting exactly what will or won't work. The above is just my experience.

  • Upvote 1

Share this post


Link to post
Share on other sites

Thanks!

 

I assume the comportment will be the same for the 700

Share this post


Link to post
Share on other sites
3 hours ago, enjalt said:

I assume the comportment will be the same for the 700

 

Yes, the 700 and 300 would respond/react the same way to the Helix. I have a 1st generation Variax and it takes a little while to sort out the behaviors, but it is still extremely functional. My favorite feature is the ability to change models with snapshots... not just with presets. 

 

One thing to note... you cannot use the Helix to communicate with Workbench with a 1st gen Variax. You need the Variax interface or an older POD (HD500, X3 live, XT Live, etc...) to do that.

 

 

  • Upvote 2

Share this post


Link to post
Share on other sites

Sorry to resurrect a dead thread, but I'm thinking of picking up a Variax 500, and I haven't read a post that explicitly answered my questions. Can you tell me if you can use a Variax 500 with Helix to:

- Change Variax 500 guitar models on the Variax with Helix by changing a preset?

- Change Variax 500 guitar tuning with Helix by changing a preset?

- Build custom tunings using HX Edit, save them and use them by selecting a preset?

- Use the Variax to send a guitar signal to external pedals in the send/return loop, in addition to the normal guitar signal path?

 

Thanks, and again, sorry to resurrect a dead post.

Edited by jcmathews
Added a question

Share this post


Link to post
Share on other sites
14 minutes ago, jcmathews said:

- Change Variax 500 guitar models on the Variax with Helix by changing a preset?

- Change Variax 500 guitar tuning with Helix by changing a preset?

- Build custom tunings using HX Edit, save them and use them by selecting a preset?

- Use the Variax to send a guitar signal to external pedals in the send/return loop, in addition to the normal guitar signal path?

 

  1. Yes... the Helix can recall any of the factory presets, plus the 10 custom locations. However.... if you edit a factory location the Helix can only access the factory default, not the edited copy you created. You must save custom presets to the custom locations in order to access them. 
  2.  Yes & No. This is a limitation of the 1st gen variax guitars. The tuning is not separate from the guitar models.... it must be saved with a guitar model. If you have a TELE that needs a drop D it must be saved as a custom model and called by the Helix as a custom model. 
  3. No. The custom tunings must be built in the 1st gen variax guitars themselves. They cannot be edited separately from the models. Because of that limitation, the Helix cannot alter the tunings directly. 
  4. Sorry, I don't understand what you are asking here... I'll need more clarification. 

Share this post


Link to post
Share on other sites

Thanks for the answer -- I was hoping you'd be the one to see the question, since you seem to be the most knowledgeable about old Variaxes and Helix. 

 

So you're saying that if you create a custom tuning, you can't save that in the Helix, you save that in the guitar in one of two custom slots? I guess I don't understand how you create a custom tuning, then -- I really don't know much about the Variaxes.

 

My question about the sending a signal to the external loop was about whether the Variax required and amp model or any other Helix processing in order to send the signal to the loop, since it doesn't have a magnetic pickup. I have keyboard emulation pedals (EHC B9 for example) in the external loops, and I use a separate path to send, return and output that signal. 

 

Thanks again...

 

Share this post


Link to post
Share on other sites

 

But you are saying that you can change the guitar model from a Les Paul to a Tele by changing a preset, with no addition intervention needed on the guitar?

Share this post


Link to post
Share on other sites
19 hours ago, jcmathews said:

 

But you are saying that you can change the guitar model from a Les Paul to a Tele by changing a preset, with no addition intervention needed on the guitar?

Refer back to my previous post in this thread.  Helix does not officially support any Variax guitars prior to the JTV series. In particular the Variax 500 is not supported and not guaranteed to work in any way with Helix.

 

Having said that, in that post I described some limited success in my experience with a Variax 300. I have not re-tested any of this with more current versions of Helix firmware. The situation may have changed by now and may change at any future time.  You should assume that the Variax 500 will not interact in any way with Helix. Any successful interaction cannot be predicted and would be a bonus.

  • Like 1

Share this post


Link to post
Share on other sites
On 11/5/2020 at 2:02 PM, jcmathews said:

So you're saying that if you create a custom tuning, you can't save that in the Helix, you save that in the guitar in one of two custom slots? I guess I don't understand how you create a custom tuning, then -- I really don't know much about the Variaxes.

 

With the first gen variax guitars you create a custom tuning with Workbench and save the guitar/tuning into a custom slot on the guitar. 

NOTE: To get workbench to work with the 1st Gen Variax you need a VDI USB Interface, or an older modeler such as an HD500 (not the X model), an X3 Live or Pro, or an XT Live. I'm using an old XT Live myself these days. 

 

On 11/5/2020 at 2:02 PM, jcmathews said:

My question about the sending a signal to the external loop was about whether the Variax required and amp model or any other Helix processing in order to send the signal to the loop, since it doesn't have a magnetic pickup.

 

The VDI port operates as an INPUT on the Helix, just like the guitar input does. Once the signal hits the Helix it is processed just like a normal guitar. Even if the Loop is the first block in the path, the Variax Input will see it. 

 

On 11/5/2020 at 2:04 PM, jcmathews said:

But you are saying that you can change the guitar model from a Les Paul to a Tele by changing a preset, with no addition intervention needed on the guitar?

 

When connected to the VDI cable this is exactly how I am using my 300. If you use snapshots you MUST set them to "discard" or you will get unpredictable results.

 

The warning from @silverhead above should be noted... he is correct when he says Line 6 does not officially support Helix > 1st Variax operation - you do approach this at your own risk.  What I can say is that once I understood all of the idiosyncrasies between the 1st gen variax and Helix...  and set my snapshots to discard... it's working just fine. 2 Years and counting. 

  • Upvote 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...