PaulGreenleaf Posted January 5, 2014 Share Posted January 5, 2014 This seems like a simple problem, but I haven't found any sufficient answers through my two hours of scouring the internet! Needless to say, it's driving me a little crazy. It was working just fine less than 24 hours ago! There is no sound whatsoever coming out of my speakers or headphones (each plugged in to the appropriate ports). Monkey is all updated; green checks everywhere. Output knob and phones knob are at maximum. Input/Output in Mac preferences is set for UX2. I've tried switching out usb cables and trying different ports. Tested headphones and speakers on other devices, they work. The only thing that changed was that I pulled out the usb cable and put it into a usb hub for a moment, then took it out and put it right back into the mac directly (I forgot, no hub with the UX2). Right after that, it stopped working correctly. Also, when I try to use logic pro X and gearbox, it doesn't register any sound coming from the mic, and when I try to play back something I recorded just a few days ago using the exact same settings, I get this message: Error while trying to synchronize Audio and MIDI Sample Rate 23482 recognized. Check conflict between Logic Pro X and external device. I use a mac with OSX 10.9.1, fully updated. The UX2 has power, the meters are at min and don't move, and the clip lights seem to be stuck on to orange. Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 5, 2014 Share Posted January 5, 2014 I would try restarting the Mac. if you haven't already. Quote Link to comment Share on other sites More sharing options...
arislaf Posted January 5, 2014 Share Posted January 5, 2014 Reinstal drivers and pod farm Quote Link to comment Share on other sites More sharing options...
PaulGreenleaf Posted January 6, 2014 Author Share Posted January 6, 2014 Tried uninstalling and reinstalling all drivers, resetting the mac, and installing pod farm 2. Still the same problem. I also noticed when I set the audio preferences in my macs input/output to the ux2, it slows down youtube videos (still no audio), and when I switch it back to built-in, the videos resume their normal pace. Quote Link to comment Share on other sites More sharing options...
PaulGreenleaf Posted January 13, 2014 Author Share Posted January 13, 2014 Is there any way to test if this is a hardware problem? Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted January 13, 2014 Share Posted January 13, 2014 Try it on another computer. Quote Link to comment Share on other sites More sharing options...
Triryche Posted January 14, 2014 Share Posted January 14, 2014 +1 to BigChas52 Since you are using Gearbox I'm guessing this is an older red faced Toneport and not a black faced Pod Studio? If it is an older Toneport you should try using POD Farm 1.12 instead of Gearbox, it replaces Gearbox for the the Toneports. If it is a black faced POD Studio, it is likely bundled with POD Farm 2. Quote Link to comment Share on other sites More sharing options...
jdamaren Posted January 23, 2014 Share Posted January 23, 2014 I am having the same problem with a PC. It was working fine last time I used it, now no sound. I haven't connected anything different. Cables checked. Drivers re-installed. Meters show input when I set it to input, however no output from monitors or headphones. Help? Quote Link to comment Share on other sites More sharing options...
mikelben Posted April 13, 2020 Share Posted April 13, 2020 did you ever fix this? I was using the ux2 and the sound stopped. I've updated all drivers etc, rebooted, gone through every menu I can think of in POD farm, computer sound settings etc The meters move when set to show input and if i record something into reason then it works, but I can't hear anything. When they are set to show output, they don't move at all. Youtube etc doesn't work either. My headphones work fine straight out of my computer. I'm out of ideas Quote Link to comment Share on other sites More sharing options...
tbone2000 Posted March 5, 2021 Share Posted March 5, 2021 Same here on PC Windows 10. NO audio except horrible slowed glitchy sounds and robot type noises. Nothing works... Done alll the latest reinstallls updates.... nothing works. Please someone help. Thanks Quote Link to comment Share on other sites More sharing options...
Andresgp_86 Posted December 13, 2022 Share Posted December 13, 2022 I have the same problem with my UX2. Does anybody find a solution for this? it is a brick right now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.