roscoe5 Posted July 19, 2019 Share Posted July 19, 2019 I just tried to update my Powercab 112+ to v2.0 through Line 6 Updater v1.17 and it failed with an error and some instructions to turn the Powercab off, connect the USB, and try again. The Powercab display was frozen showing "Select/Connect USB". Updater would not see the Powercab again unless I restarted the computer. I tried different USB ports, but no success. I had just updated Helix to 2.80 with the same USB cable in the same computer port successfully on the first try. Quote Link to comment Share on other sites More sharing options...
PierM Posted July 19, 2019 Share Posted July 19, 2019 Contact L6 via support. Quote Link to comment Share on other sites More sharing options...
roscoe5 Posted July 19, 2019 Author Share Posted July 19, 2019 Okay will do Quote Link to comment Share on other sites More sharing options...
roscoe5 Posted July 21, 2019 Author Share Posted July 21, 2019 Well, I didn't end up contacting support. I was able to update successfully with my wife's laptop with only Line 6 updater installed. Must be an issue with USB on my Alienware X51 R2. Funny that my Helix 2.80 update went fine amd not the Powercab Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.