Dannyboy617 Posted July 22, 2019 Share Posted July 22, 2019 (edited) Does the IR block go directly after the amp+cab block. I have external drives > input of hx stomp>amp+cab block. Then I split signal to effects loop. Out of send> external verbs and delays> back to stereo return > IR block> stereo Something isn’t sounding right with my drives...almost like in a tin can...i can’t eq my way out of it...I see all these videos of nice tones but I can’t get it...I can’t get a nice bite on my drives it’s flat and smooth..no attack to my notes Any suggestions on why?...something in my signal path? Edited July 22, 2019 by Dannyboy617 Quote Link to comment Share on other sites More sharing options...
rd2rk Posted July 22, 2019 Share Posted July 22, 2019 12 hours ago, Dannyboy617 said: Does the IR block go directly after the amp+cab block. Use an IR after an Amp block, not an Amp+Cab, as an IR IS a cab, and you're running a cab through a cab. If you want to use an IR with a cab, use an Amp block vs Amp+Cab, then pull one of them (IR or Cab) down into a parallel path. That way they'll be blended vs running one into the other. See if that helps with the drive sound. 1 Quote Link to comment Share on other sites More sharing options...
Dannyboy617 Posted July 22, 2019 Author Share Posted July 22, 2019 Thanks I’ll see how it goes...it’s for a hx stomp...I’m basically using the hx stomp as an amp and some additional modulations...so I’m obviously limited with what I can do path wise...just want a nice clean tone....and for my external drives Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.