phil_m Posted August 6, 2019 Share Posted August 6, 2019 CLICK HERE if your Helix/HX hardware has already been updated to 2.80.0 firmware. CLICK HERE if your Helix/HX hardware is running firmware 2.71.0 firmware or older. Bug Fixes in 2.81 The active EXP Pedal (1 or 2) was not saved with the preset On Helix LT, the XLR Outputs would reset to Mic level upon power cycle After loading two presets in a row containing a Looper block on Path 1B or 2B, audio could sometimes drop out In rare cases, restoring a backup made on 2.71 could cause headphone audio to be lost In hands-free Pedal Edit Mode, moving an expression pedal could also affect any Wah, Volume/Pan, or controller assignments Changing IRs via controller or snapshot could sometimes result in an audible crossfade between IRs Presets with Input > S/PDIF blocks would not pass audio until another preset with a different input block is loaded When Global Settings > Preferences > Snapshot Edits is set to "Discard," tempo would not reflect this setting when set to "Per Snapshot" Command Center > MMC > Record, Punch In, and Punch Out commands could not transmit correctly In rare cases on Helix Floor, Helix Rack, and Helix LT, FS6 (MODE) could fail to toggle between footswitch modes Adjusting certain Frequency parameters (typically those below 1kHz) could change at different increments between hardware and HX Edit In HX Edit, assigning both a block and Command Center command to the same footswitch could result in erratic behavior when attempting to change the LED color Snapshot-controlled Command Center > CC Toggle or CV Toggle values could sometimes not import correctly from older presets In rare cases, undoing a footswitch assignment remotely from HX Edit could result in a firmware crash In HX Edit, repeatedly pressing Up/Down arrows could inadvertently jump to the bottom of the controller parameter list In HX Edit, attempting to undo hardware changes after a Global Factory Reset could sometimes reload preset data from before the reset In HX Edit, performing an Undo/Redo function could sometimes cause a Cab > Dual block to change to a Cab > Single block In HX Edit, performing an Undo/Redo function could sometimes cause a stereo effect block to change to a mono effect block In HX Edit on Windows, the Edit panel's sliders could sometimes fail to appear In HX Edit on Windows, customized Command Center text could sometimes be truncated On Windows, the Win Defender pop-up could block installation of Helix Native or HX Edit Known Issues in 2.81 On Helix Rack/Control, connecting an expression pedal to Helix Control could sometimes cause the pedal position display to behave erratically Pitch/Synth > 3 OSC Synth, 3 Note Generator, and 4 OSC Generator are louder than in 2.71 In rare cases, the Dynamics > LA Studio Comp model can sometimes cause a drop in preset volume In HX Edit, applying a custom color to a Snapshot footswitch can sometimes not be reflected on the hardware. For now, apply snapshot footswitch colors from the hardware In HX Edit, if the current preset has not been saved, importing a different preset, setlist, or bundle does not currently clear the Undo history In rare cases, Helix/HX devices can become disconnected from HX Edit. If possible, always connect your Helix/HX device directly to the USB port closest to your computer's power connector. Never use any sort of USB hub, which may include the front USB ports on the front of towers Helix Native will not open in hardened runtime builds of Cubase 10.5 Some tempo synced effects can act authentic with the global setting set to transparent if tempo changes are controlled via snapshots. In HX Edit, importing a setlist containing Command Center > Instant commands may transmit the messages even if no new preset is loaded Logic Pro X is currently unable to write snapshot or switch automation data for Helix Native In HX Edit, performing an undo after a block cut or clear can delete the block's footswitch and/or controller assignments In HX Edit, moving an effect, amp, cab, or IR block can sometimes inadvertently reposition a Split or Merge block In HX Edit, certain Output > Powercab and DT parameters cannot currently be assigned to snapshots via Alt+click/Option+click. For now, press and turn the knob on the Helix hardware In HX Edit, Ctrl+click/Command+click on certain Output > Powercab and DT parameters may not reset them to default settings In Helix Native, changing models can clear automation assignments of common parameters (such as Amp > Bass or Delay > Time) 1 6 1 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.