malcevansmusic Posted January 12, 2014 Share Posted January 12, 2014 Hi! I hope everyone is having a great 2014 so far? Just a quick question that the pro's may be able to help me with. I'm running a M20d and 2xL2T speakers (and 4 powered Behringer monitors). I've been asked to engineer a gig next month and it was suggested that I'd need a sub speaker to augment the set-up. How would I link a powered sub (non Line 6) to the L2T's? Is it simply a case of linking with XLR speaker cables in the appropriate way (into the sub then out to the speakers)? Any advice appreciated. Thank you. Malc Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 12, 2014 Share Posted January 12, 2014 Yes - just connect them as you would normally. Run the Main Outs to your sub, then connect the 2xL2t using the XLR rather than L6 LINK connections. Quote Link to comment Share on other sites More sharing options...
Profett Posted January 12, 2014 Share Posted January 12, 2014 Why not connect the l2ts with 6link? Quote Link to comment Share on other sites More sharing options...
malcevansmusic Posted January 12, 2014 Author Share Posted January 12, 2014 Thanks! I've been doing a bit of reading since posting at I think I know what to do now. I don't have the link cable, just XLR's. Quote Link to comment Share on other sites More sharing options...
dboomer Posted January 12, 2014 Share Posted January 12, 2014 You'll need to add a crossover in the setup. Possibly there is a crossover in the other sub. In that case you run from the main outs to the sub and then run the high pass outs to the L2's. Otherwise you'll need to run into a crossover and send the outs from it in the normal manner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.