pod hd 500x send → mixer

[korail]

I want to send dry signal from 500x send to mixer

 

in this situation, is DIbox uesless?

 

oh, I use trs y cable   one signal sends mixer, other signal sends 500x return.

[pianoguyy]

The 500 doesn't do dry signal. 

but, let's say you designed a patch with a "dry signal". The 500 can go directly into a mixer via the XLR jacks. No DI needed. 

 

[spaceatl]

A really easy way to do that would be to create a dual tone patch, hard panned where chain A is empty with no amp model, chain B is whatever you like. A is dry, B is whatever it is you are doing...you could just use the XLRs...that is if by dry you mean no amp, no fx...

[korail]

Thanks, um...I want wet/dry/wet    I'll try guitar - pod in( comp - drive - amp) - pod send - mixer

                                                                                                                                                          - pod return (path a : delay  ,  path b : reverb)    -   pod balanced out R/L   -  mixer

 

                                                                                                                                             

If di box don't need       (pod send - mixer)  ←  send signal is low impedence?     

[pianoguyy]

On 9/2/2019 at 7:18 PM, spaceatl said:

that is if by dry you mean no amp, no fx...

Yeah, ya know what.... 

To me, dry means the unaltered signal. To some, effects like distortion is still dry. 

[Motoblues1957]

I was suggesting the following:

Wet signal: time based stereo effects with two monitor speakers

Dry signal: amp and any effect other than time based connect to an amp or speaker.