alushemo Posted January 15, 2014 Share Posted January 15, 2014 Well, i have 2 years with my unit, and it works perfect, but this week turned crazy, when i switch the fx2 button, pop up to fx3 or fx4. when i switch the mode button it works like i had pushed the preset button. I have factory restored the unit but still the same problem. Quote Link to comment Share on other sites More sharing options...
smrybacki Posted January 15, 2014 Share Posted January 15, 2014 Is it possibly this (from the manual) switch on the lower far left corner of your POD? ================================= Mode Footswitch/LEDs - Use this switch to toggle through the 3available footswitch modes.Preset Mode (Green LED):A B C DPress a footswitch to load its preset (A, B, C or D). Looper Mode (Red LED):PRE/POSTREC/OVERDUBPLAY/STOPPLAYONCEEquips your POD HD400 with 24 seconds of looping capability.The PRE/POST footswitch allows you to set your loop recordingand playback either before amp and effects modeling or after (LEDoff=PRE, LED on=POST). Recording in PRE mode (LED off) let’s yourecord your guitar, then audition various effects with your loop playingback, while recording in POST mode (LED on) captures your amp andeffects in the loop and then layer different sounds by changing presets.Note: changing the state of the PRE/POST footswitch while the loopis playing back can dramatically change the volume, so be careful!)Stomp REC/Overdub to start recording a loop then stomp Play /Stop to end loop and immediately start playback. You can overdubadditional parts by again, stomping the Rec/Overdub switch. StompPlay /Stop to stop or start playback. You can exit Looper Mode evenwhen a loop is still playing to switch presets or turn amps and effectson/off and return back to add additional loops. How cool is that? Pedal On/Off Mode (Amber LED):AMP FX1 FX2 FX3Gain total control of your preset tone in Pedal On/Off mode. There are4 components to your signal path - Amp, fx1, fx2 and fx3. Use theappropriately labeled switch to turn any of these on (LED lit) or off.Just like a real pedalboard full of stompboxes! Quote Link to comment Share on other sites More sharing options...
alushemo Posted January 15, 2014 Author Share Posted January 15, 2014 I understand what you're trying to explain. the problem with my unit is the fx2 button and the mode button, when I try to press them individually do not work properly. for example if I have my unit in preset mode and I choose the fx2 are chosen randomly or fx3 or fx4. I think it's a logical problem of unity, given that work all the knobs and switches Quote Link to comment Share on other sites More sharing options...
smrybacki Posted January 15, 2014 Share Posted January 15, 2014 I understand what you're trying to explain. the problem with my unit is the fx2 button and the mode button, when I try to press them individually do not work properly. for example if I have my unit in preset mode and I choose the fx2 are chosen randomly or fx3 or fx4. I think it's a logical problem of unity, given that work all the knobs and switches Sorry that didn't help you. Have you opened a support ticket? Might be your next step... Before that, you may want to try and reinstall the latest firmware with the Monkey. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.