tommasoferrarese Posted September 15, 2019 Share Posted September 15, 2019 Hi everybody I lost one of the knobs from my HX stomp, and another one is repeatedly coming off.. do you know where I can find some good replacement knobs? I'm thinking about replacing them all, as they are starting to come offend I don't want to lose another one.. Thanks! Quote Link to comment Share on other sites More sharing options...
karlkaminski Posted September 17, 2019 Share Posted September 17, 2019 this will be hard to come by OEM. try Support, but I doubt they'll be able to help (unless youre still under warranty?) This shouldn't happen and a replacement might be an easy 'get'. try to contact one of the Stomp development/online guys to take mercy on you in sourcing a part/pointing you in the right direction. if not under warrnty or you just want a different knob to dress your HXS: measure exact knob dimensions google (image search) aluminum knobs to locate possible sources also search sites like; digikey, mouser, markertek, DIY pedal/stomp box sites, finally; ebay, amazon good luck Quote Link to comment Share on other sites More sharing options...
codamedia Posted September 18, 2019 Share Posted September 18, 2019 I am pretty sure the Helix and the HX Stomp use the same encoder knobs. Might want to double check with Line 6 before ordering.... https://www.fullcompass.com/prod/525523-line-6-30-45-0049-edit-knob-for-helix If you want a 3rd party knob with a set screw... measure the shaft width and buy any knob that will fit. 1/4" shaft is common, but I'm not 100% sure that is correct in this case. I have seen reports that these knobs are secured with a small dab of adhesive. If they are coming off easily... I would assume the adhesive has let go. If you go to take one off and it is being difficult, be careful. You don't want to damage the encoder itself. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.