Jump to content
Sign in to follow this  
robocap

JTV-59 allen wrenches

Recommended Posts

Recently I've bought an used JTV-59, which arrived without any allen wrench. Needing to make the usual guitar setup, when I tried with my normal (here in EU) metric allen wrenches I found none fitted in. So I have bought on Amazon an inch size allen set and found that the correct wrench size to adjust the action is 7/64" and the one to adjust the strings intonation is 3/32". I hope this can be useful to other Europeans with the same problem

Share this post


Link to post
Share on other sites

If it is a second hand used guitar, it is possible the hex wrench kit might not be in it.

And 4mm is for the truss rod adjust.

 

Share this post


Link to post
Share on other sites

I did not mentioned the truss rod (4mm) and the horizontal bridge position adjust (1,5mm) wrenches because they are metric and very common in Europe.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...